Spongy electrodes designed for better births

New technology should help doctors learn more about preterm labor, while making it easier on patients

four small sponges, about one cm across, lined up
These tiny sponges may help uncover the causes of preterm labor. (Image: Chuan Wang)

In nearly 10% of births worldwide, labor comes early. Far from being a pleasant surprise, preterm births increase the likelihood of complications ranging from anemia and jaundice to cerebral palsy and learning disabilities.

Despite its well-known risks, doctors are still working to understand why some people go into labor early. The current technology used to map uterine contractions with the sensitivity needed to create a 3D visualization is too cumbersome to be used with any regularity; it’s reserved for clinical trials but wouldn’t be feasible for the average patient.

Headshot of Professor Chuan Wang, McKelvey School of Engineering
Wang

Enter the labs of Chuan Wang, assistant professor, Shantanu Chakrabartty , the Clifford W. Murphy Professor, and Yong Wang, associate professor, all in the Preston M. Green Department of Electrical and Systems Engineering at the McKelvey School of Engineering at Washington University in St. Louis. Yong Wang also has an appointment at the School of Medicine. The team has developed a technology that may help doctors collect the data they need without the patient needing to leave home.

The details of the soft, sponge-like electrodes the team developed were published July 21 in the journal ACS Nano.

“The current technology is great, but it is very cumbersome to apply hundreds of wired electrodes to a patient, especially in the later stages of pregnancy,” Chuan Wang said. “Patients have to sit still, and it takes sometimes a half hour just to apply the electrodes.”

Wang’s new technology involves ultrathin, spongy electrodes — made from a conductive polymer — that can collect high-quality electrophysiologic signals from the body in less time and without the need for a trip to the hospital.

There are several major benefits to using a spongy material for electrodes: It is soft and stretchable, much more comfortable and there is no tangle of wires. “Ideally, we’d like to use it in a textile, or smart clothing,” Wang said.

Like dishwashing detergent in a sponge, a conductive gel fills the spongy material’s micropores. An electrode in use today collects signals from the area where the electrode is attached to the skin; in contrast, the pores of a spongy electrode hold gel, which means the inner surface of all the micropores are in electrical contact with the skin. “Effectively, we are increasing the electrode surface area by five times while not occupying any more space.”

This means the electrode can record cleaner electrocardiogram (ECG) or electromyogram (EMG) signals with better signal-to-noise ratio from the body.

Gel-filled pores also make good shock absorbers and help reduce motion-artifacts. In a hospital setting, any sudden movement — sitting up, for example — can lead to a loss of signal. Wang’s sponge, however, deforms and moves with a person. In experimental settings, the soft electrode was able to continue capturing ECG signals that conventional electrode missed when the subject was in motion.

And the electrode can capture data over many hours, whereas a traditional electrode cannot, because of the increased staying power of the conductive gel, trapped inside the spongy electrode’s pores.

“It’s similar to a dish sponge — soak it in water and it takes a very long time to dry.

“For a conventional electrode, after about an hour, the gel dries and the signal is gone,” but after three hours, the sponge electrode’s signal has barely lost strength.

Wang’s lab recently received a grant for the next phase of the project — powering the electrodes wirelessly so the patient can collect and transmit data without leaving home.


This work was funded by the Bill & Melinda Gates Foundation (INV-005417, INV-035476)

The McKelvey School of Engineering at Washington University in St. Louis promotes independent inquiry and education with an emphasis on scientific excellence, innovation and collaboration without boundaries. McKelvey Engineering has top-ranked research and graduate programs across departments, particularly in biomedical engineering, environmental engineering and computing, and has one of the most selective undergraduate programs in the country. With 140 full-time faculty, 1,387 undergraduate students, 1,448 graduate students and 21,000 living alumni, we are working to solve some of society’s greatest challenges; to prepare students to become leaders and innovate throughout their careers; and to be a catalyst of economic development for the St. Louis region and beyond.

Leave a Comment

Comments and respectful dialogue are encouraged, but content will be moderated. Please, no personal attacks, obscenity or profanity, selling of commercial products, or endorsements of political candidates or positions. We reserve the right to remove any inappropriate comments. We also cannot address individual medical concerns or provide medical advice in this forum.